RO Pure Water Treatment is the most precise membrane liquid separation technology. The operating pressure is applied on the side of the inlet water and the concentrated solution to overcome the natural osmotic pressure.
When the operating pressure higher than the natural osmotic pressure is dropped on the side of the concentrated solution water molecules naturally permeate the flow The direction will be reversed, and the water molecules in the influent concentrated solution pass through the reverse osmosis membrane to become the purified water om the dilute solution side Reverse osmosis suitable equipment can block all soluble salts and organic substances with a molecular weight greater than 100. but allow water molecules to pass through, The salt rejection rate of reverse osmosis composite membranes is generally greater than 98%.
RO Tratarea apei pure
Most of our projects use DOW Filmtec, Toray, Vontron, Hydranautics, LG brands. They are well-known brands in the water treatment industry.
The reverse osmosis membrane is the core element to realize reverse osmosis, and it is an artificial semipermeable membrane with certain characteristics made by simulating biological semipermeable membrane. Generally made of polymer materials. Such as cellulose acetate film, aromatic polyhydrazide film, aromatic polyamide film. The diameter of the surface pores is generally between 0.5 and 10 nm, and the permeability is related to the chemical structure of the membrane itself. Some polymer materials have good repellency to salt, but the permeation speed of water is not good. The chemical structure of some polymer materials has more hydrophilic groups, so the permeation speed of water is relatively fast. Therefore, a satisfactory reverse osmosis membrane should have an appropriate amount of permeation or salt rejection.
Additionally, commercial RO water treatment systems can incorporate chemicals such as anti-scaling (scaling inhibitors), anti-fouling, pH adjustment, sterilization and disinfection chemicals in the pre- or post-treatment. We keep a close eye on the water treatment industry and add new water technologies to our reverse osmosis water plants.
When checking the customer's water quality analysis report, sometimes due to scaling and scaling problems, we can use the CIP (cleaning-in-place) system to clean the membrane in the membrane shell to make the membrane longer life. It is a new type of water treatment technology most used in the water treatment industry.
Puterea electrică a sistemelor comerciale de tratare a apei RO
Pentru instalatia comerciala de epurare a apei este nevoie de 220-380V/50Hz/60Hz. Pentru o capacitate mai mare, în special pentru sistemul industrial de osmoză inversă, datorită pompei de înaltă presiune, are nevoie de 380V 50/60Hz. În ceea ce privește proiectarea mașinii dvs. comerciale de filtrare a apei cu osmoză inversă, vă vom verifica alimentarea electrică și vom decide alimentarea fixă pentru dvs. De asemenea, avem câteva metode de economisire a energiei pentru a reduce costurile electrice, noile tehnologii de tratare a apei Chunke vă ajută să reduceți cel mai mare cost pentru funcționarea sistemului.
Înainte de a cumpăra un sistem comercial de purificare a apei, trebuie să știți:
1. Capacitatea de producție a apei pure (L / zi, L / oră, GPD).
2. TDS apă de alimentare și raport de analiză a apei brute (prevenirea problemei de murdărire și scalare)
3. Fierul și manganul trebuie îndepărtate înainte ca apa brută să intre în membrana de filtrare a apei cu osmoză inversă
4. TSS (Total Suspended Solid) trebuie îndepărtat înainte de membrana sistemului comercial de purificare a apei.
5. SDI (indicele densității nămolului) trebuie să fie mai mic de 3
6. Trebuie să vă asigurați că sursa de apă nu are ulei și grăsime
7. Clorul trebuie îndepărtat înainte de sistemul comercial de tratare a apei
8. Tensiunea și faza de putere electrică disponibile
9. Dispunerea locului pentru sistemul comercial de osmoză inversăSpecificația de funcționare pentru sistemele comerciale de tratare a apei RO
TDS apă de alimentare: 0 - 1000ppm
|
Duritate peste 18ppm Necesită dozare antiscalantă
|
Turbiditatea trebuie să fie
Scos
|
Max. temperatura apei de alimentare: 42°C
|
Operați la rezultate TDS mai mari mai mici
Recuperare
|
H2S trebuie să fie
Scos
|
Toleranță pH: 3-11
|
Max. Conținut de fier: 0.05ppm
|
|
Presiunea apei de alimentare: 1,5 până la 6 bar
|
Max. Toleranță la silice: 60ppm
|
|
Contact us to learn more about our industrial reverse osmosis systems and commercial RO water plants. Our sales team and technical team will be happy to share new water treatment technologies for your project.